Product Support Information

1. Cannon Ball Feet Installation

2. Claw Feet Installation

3. Pedestal Tub Assembly

4. Faucet Installation

5. General Guidelines

 

Cannon Ball Feet Installation

PRE ASSEMBLY
To install the  Feet on the bathtub, turn the bathtub upside down on a protective covering. It is recommended that two people are required to overturn or lift your bath into place.

ASSEMBLY COMPONENTS

 
 
Ensure all parts are present before assembling your bathtub.
 
 
1.Place foot over existing supports on the base of your bathtub.
 
  2.Using bolt and washer tighten foot to base of bathtub.
 
 
3. Each foot can be adjusted by turning the height adjuster at the base of the foot.
 
 
 
 

2.Claw Feet Installation

Back to Top

 

PRE ASSEMBLY
To install the Feet on the bathtub, turn the bathtub upside down on a protective covering. It is recommended that two people are required to overturn or lift your bath into place.


ASSEMBLY COMPONENTS
In addition to your chosen feet option each bathtub will include assembly components A or B as outlined below.
Option A
Option B
 
 
1.Remove nuts from base of the bathtub and re-use to tighten support bar in place.
                                                
 
 
 
2. Using bolt and washer hand tighten bolt to bathtub foot.
 
 
  
3. Using a spanner tighten sufficiently.
 
 
 
4. Adjust height of bathtub to ensure it is balanced on any uneven surfaces.
 
 
 
 

3. Pedestal Tub Assembly

Back to Top

 

PRE ASSEMBLY
To install the pedestal / Feet on the bathtub, turn the bathtub upside down on a protective covering. It is recommended that two people are required to overturn or lift your bath into place.

 

ASSEMBLY COMPONENTS
 
Ensure all parts are present before assembling your bathtub.
 
1.Place pedestal base on your  overturned bathtub.
 
 
 
 2.Ensure waste water hole is aligned with the pedestal base.
 
 
 
3.Using nut and washer tighten pedestal base in place.
 
 
4.Using a spanner tighten nut sufficiently.
 
 
5. After turning your bathtub over the height can be adjusted with the height adjustable feet in the pedestal.

 
 
 

4.INSTALLATION OF FAUCET

Back to Top

For the installation of faucets with this bathtub please refer to the installation guides for these products. It is recommended that any faucets are fitted by a certified plumber to ensure against any leaks.
 
 

5. GENERAL INFORMATION

Please read this manual carefully before installation and install the bathtub accordingly.MyTubs is not responsible for any damage due to improper installation or an installation that is not in accordance with your local building and plumbing codes. MyTubs recommends having a licensed or certified plumber install your bathtub. CAUTION: Do not place light bulbs or other high temperature tools in or on the bathtub. In addition, do not use harsh detergents or cleaners on the bathtub as it may damage the finish
 
 
 
HEALTH & SAFETY
CAUTION:
To avoid personal injury, always exercise caution when entering or exiting the bathtub.
DANGER:
To reduce the risk of injury, do not permit children to use bathtub unless they are closely
supervised by an adult at all times.
DANGER:
The use of alcohol, drugs, or medications before or during bathing may lead to unconsciousness and the possibility of drowning.

 
 
MAINTENANCE
CAUTION: Do not use corrosives such as paint thinner or acetone to clean the bathtub or remove stains. Irreparable damage to the bathtub finish will occur. Always clean your bathtub immediately after use. This makes it easier to clean and provides best results. Use a soft cotton cloth with a mild soap. Harsh or abrasive cleaners can harm the finish.
Using nut and washer tighten pedestal base in place. Using a spanner tighten nut sufficiently. After turning your bathtub over the height can be adjusted with the height adjustable feet in the pedestal.
 
 
Link to Clawfoot Tub Products